Novoperm Yellow P-M3R
Pigment Yellow 139
Novoperm Yellow P-M3R is a red shade isoindoline pigment of the P-grade range with extremely low specific conductivity (< 0,2 mS/cm), especially recommended for solvent based packaging printing inks. It exhibits high color strength, high gloss and high transparency with very good rheological and fastness properties, except the alkaline fastness, which is only fair.
Customer Support
How can we help you?
Benefits
- High color strength
- High gloss and transparency
- Very good rheological behaviour
- Good fastness properties
Technical data
Product Data
Physical Data
| Density | [g/cm3] | 1.66 |
| pH-value | – | |
| Specific surface | [m2/g] | 63 |
| Average particle size | [nm] | 58 |
| Fineness of grind | [µm] | – |
| Viscosity | [Pa.s] | – |
| Oil absorption | [ml/100g] | 50 |
Fastness properties
| Staining of the test medium by: | |||
| Test medium | Powder pigment | Print / draw-down | Change of the print |
| Solvent mixture | 4-5 | – | – |
| Ethanol | 4-5 | – | – |
| Ethyl acetate | 4-5 | – | – |
| MEK | 4-5 | – | – |
| Toluene | 4-5 | – | – |
| White spirit | 5 | – | – |
| DOP | 5 | – | – |
| Paraffine | 5 | 5 | – |
| Butter | – | 5 | – |
| Soap | – | 5 | 5 |
| Alkali | – | 4-5 | 2 |
| Acid | – | 5 | 5 |
| Heat stability | 10 min. | 200°C | |
| 30 min. | 180°C | ||
| Light fastness | 1/3 SD | 5.0 % | 6 |
| Light fastness | 10.0% | 6-7 | |
| Silver laquer | – | ||
| Sterilization | Water phase | Steam phase | |
| – | – | ||
Applications
Recommended for
Paste inks
| Sheetfed | ● |
| Heatset | ○ |
| Coldset | ○ |
| Silkscreen | ● |
| Metal deco | ■ |
| UV curing (Offset) | ● |
Liquid inks
| NC alcohol | ■ |
| NC acetate | ■ |
| Waterbased | – |
| Polyvinyl butyral | – |
| Polyamide | – |
| Pub gravure, Toluene | – |
| Decorative laminates | – |
| UV curring (Flexo) | ■ |
■ highly recommended
● recommended
○ limited suitability
– not tested