Novoperm Yellow FGL for Printing
Pigment Yellow 97
Novoperm Yellow FGL is a mid shade monoazo pigment, similar to Pigment Yellow 1 grades, but with much better fastness properties and good heat stability. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks.
Customer Support
How can we help you?
Benefits
- Very good fastness properties
- Excellent heat stability
Technical data
Product Data
Physical Data
| Density | [g/cm3] | 1.39 |
| pH-value | – | |
| Specific surface | [m2/g] | 14 |
| Average particle size | [nm] | 255 |
| Fineness of grind | [µm] | – |
| Viscosity | [Pa.s] | – |
| Oil absorption | [ml/100g] | 55 |
Fastness properties
| Staining of the test medium by: | |||
| Test medium | Powder pigment | Print / draw-down | Change of the print |
| Solvent mixture | 4-5 | 5 | 5 |
| Ethanol | 5 | 5 | 5 |
| Ethyl acetate | 4 | 4-5 | 4-5 |
| MEK | 4 | 4-5 | 4 |
| Toluene | 4-5 | 4-5 | 5 |
| White spirit | 5 | 5 | 5 |
| DOP | 5 | 5 | – |
| Paraffine | 5 | 5 | – |
| Butter | – | 5 | – |
| Soap | – | 5 | 5 |
| Alkali | – | 5 | 5 |
| Acid | – | 5 | 5 |
| Heat stability | 10 min. | 220°C | |
| 30 min. | 200°C | ||
| Light fastness | 1/3 SD | 13.1 % | 6 |
| Light fastness | 10.0% | 6 | |
| Silver laquer | 5 | ||
| Sterilization | Water phase | Steam phase | |
| 4-5 | 5 | ||
Applications
Recommended for
Paste inks
| Sheetfed | ● |
| Heatset | ● |
| Coldset | ■ |
| Silkscreen | ● |
| Metal deco | ● |
| UV curing (Offset) | ■ |
Liquid inks
| NC alcohol | ● |
| NC acetate | ● |
| Waterbased | ● |
| Polyvinyl butyral | ■ |
| Polyamide | – |
| Pub gravure, Toluene | – |
| Decorative laminates | ● |
| UV curring (Flexo) | ■ |
■ highly recommended
● recommended
○ limited suitability
– not tested